Greetings all
I'll be installing a Celfi-Go in my 2017 Wildtrak in a week or two.
I've had a look through the archives for tips.
I'm aiming at making a semi-permanent fixture behind the rear seat for the main unit, punch through the rear grommet for the external antenna & stick the internal antenna under the centre console up front.
Anyone had any hurdles along the way with a similar installation?
Cel-Fi Go Installation
Re: Cel-Fi Go Installation
Installed in a 2016 Wildtrak. Only difference external antenna on front bull bar.
Ran cables to back down channels next to drivers and rear passenger doors. Just be careful take covers up that you don't break clips.
Cel-fi unit powered from rear cigarette lighter, cable under rear floor mats . It needs to be powered from accessory wiring so it turns off when car not in use.
Ran cables to back down channels next to drivers and rear passenger doors. Just be careful take covers up that you don't break clips.
Cel-fi unit powered from rear cigarette lighter, cable under rear floor mats . It needs to be powered from accessory wiring so it turns off when car not in use.
10/2016 MY17 PX2 Wildtrak Auto Pride Orange Sync 3