Flipping centre bearing

Non Ranger Related Subjects
Post Reply
Kermet
Member
Posts: 12
Joined: Mon May 02, 2022 8:35 pm

Flipping centre bearing

Post by Kermet »

Hi guys I feel a slight shudder or take off with my Px2 ranger
2018 xlt 2 Inc lift 33 " tyres etc have people flipped the centre bearing and had success and whats involved .

Regards Nathan
jstanovic
300 Club
Posts: 493
Joined: Fri Feb 09, 2018 12:27 am

Re: Flipping centre bearing

Post by jstanovic »

Undo 2 bolts, flip it round and put bolts back in. Make sure you mark/measure the original position in case you need to put it back. When reinstalling, spend some time lining it up, there is quite a bit of adjustment and it's easy to not get the alignment correct.
2014 PX1 XLT auto
Kermet
Member
Posts: 12
Joined: Mon May 02, 2022 8:35 pm

Re: Flipping centre bearing

Post by Kermet »

Thanks mate ill give it a crack . Muchly appreciated
SeaJay1962
Member
Posts: 9
Joined: Sun Oct 27, 2019 9:19 am

Re: Flipping centre bearing

Post by SeaJay1962 »

I had the shudder, after trying a few things ended up getting a one piece driveshaft made
saum2
25 Club
Posts: 25
Joined: Sun Apr 24, 2022 12:29 pm

Re: Flipping centre bearing

Post by saum2 »

Or you could use spacers made for this purpose. I did.
Kermet
Member
Posts: 12
Joined: Mon May 02, 2022 8:35 pm

Re: Flipping centre bearing

Post by Kermet »

Ok one piece and how is that going for you mate .

I have spacers currently and I still feel the shudder
SeaJay1962
Member
Posts: 9
Joined: Sun Oct 27, 2019 9:19 am

Re: Flipping centre bearing

Post by SeaJay1962 »

works fine, I couldnt fix mine with spacers either
Kermet
Member
Posts: 12
Joined: Mon May 02, 2022 8:35 pm

Re: Flipping centre bearing

Post by Kermet »

Thanks mate . Who did and cost of one piece mate
SeaJay1962
Member
Posts: 9
Joined: Sun Oct 27, 2019 9:19 am

Re: Flipping centre bearing

Post by SeaJay1962 »

DBS in Malaga, $1000 cash price
Post Reply