Flipping centre bearing

[Kermet]

Hi guys I feel a slight shudder or take off with my Px2 ranger
2018 xlt 2 Inc lift 33 " tyres etc have people flipped the centre bearing and had success and whats involved .

Regards Nathan

[jstanovic]

Undo 2 bolts, flip it round and put bolts back in. Make sure you mark/measure the original position in case you need to put it back. When reinstalling, spend some time lining it up, there is quite a bit of adjustment and it's easy to not get the alignment correct.

[Kermet]

Thanks mate ill give it a crack . Muchly appreciated

[SeaJay1962]

I had the shudder, after trying a few things ended up getting a one piece driveshaft made

[saum2]

Or you could use spacers made for this purpose. I did.

[Kermet]

Ok one piece and how is that going for you mate .

I have spacers currently and I still feel the shudder

[SeaJay1962]

works fine, I couldnt fix mine with spacers either

[Kermet]

Thanks mate . Who did and cost of one piece mate

[SeaJay1962]

DBS in Malaga, $1000 cash price