Full 5/5 suspension lift PX2

A Place To Show Off Your Ranger Photo's
Post Reply
Makersmark98
Member
Posts: 5
Joined: Tue Jun 06, 2023 8:10 pm

Full 5/5 suspension lift PX2

Post by Makersmark98 »

New build I have nearly completed, going for a 5 inch front and rear suspension lift, along with lots of other goodies I made myself.

-Profender remote res front and rear shocks.
-10in travel rear, modified lower mount to take the longer shock.
-custom UCA's with corrected angles and loads of adjustment on spherical rod ends (less friction). Made these myself after 3d scanning original ones.
-35mm weld in diff drop.
-35 inch wheels with -35 offset (temporary steelies atm)
-terrain tamer parabolic springs.
-custom front bar with winch.
-custom sheetmetal ali snorkel
-utemaster steel tray
-raptor coated chassis.
-custom sheetmetal flares

And lots of other goodies to go on, among the other things i have forgotten.

Will post more pics as it gets more finished. :D
Attachments
IMG_20230609_122758_01.jpg
IMG-20230614-WA0023.jpeg
IMG-20230719-WA0027.jpeg
20230724_183344.jpg
Edsel
25 Club
Posts: 26
Joined: Wed Mar 19, 2014 5:35 pm

Re: Full 5/5 suspension lift PX2

Post by Edsel »

Nice work. Do some of these mods need an engineer's certificate?
SimonT
Member
Posts: 3
Joined: Mon Apr 04, 2022 9:58 am

Re: Full 5/5 suspension lift PX2

Post by SimonT »

keen to hear your feedback re the parabolics.
I nearly went a set but was advised not for my setup.
Post Reply