Page 1 of 1

Fx4 work in progress

Posted: Sun Jun 13, 2021 12:33 pm
by Seanfx4
Hey guys, just adding some new pics of my Ranger. Everything has been installed by myself.
3" Front lift
2" Rear
Tough dog UCA's
Tjm Bar (with sensors& radar)
Stedi lights
35mm flares.

Stereo all Audison
6.5" Splits
6.5" Coax
10" Slim sub custom made box
5ch amp
Sound deadening

Alot more to come!
CheersImageImageImageImageImageImageImageImage

Sent from my SM-G996B using Tapatalk


Re: Fx4 work in progress

Posted: Sun Jun 13, 2021 4:12 pm
by Prado - 3D
Nice mate.

WA plates, where you from?

Cheers, DJ

Re: Fx4 work in progress

Posted: Sun Jun 13, 2021 4:13 pm
by Seanfx4
Perth, landsdale

Sent from my SM-G996B using Tapatalk


Re: Fx4 work in progress

Posted: Sun Jun 13, 2021 5:57 pm
by Prado - 3D
I’m just around the corner in Alexander Heights.

Re: Fx4 work in progress

Posted: Sun Jun 13, 2021 7:12 pm
by Seanfx4
Nice, you get out any tracks?

Sent from my SM-G996B using Tapatalk


Re: Fx4 work in progress

Posted: Sun Jun 13, 2021 8:53 pm
by Prado - 3D
More up north coast than local mate. Head Ledge/Lano way more often. You?

Re: Fx4 work in progress

Posted: Mon Jun 14, 2021 9:55 pm
by Komang
Nice looking mate, love to put sub in mine

Re: Fx4 work in progress

Posted: Thu Jun 17, 2021 12:37 am
by Seanfx4
Pretty easy install if your keen to do it yourself. I'm gonna build another box for 2 subs soon

Sent from my SM-G996B using Tapatalk


Re: Fx4 work in progress

Posted: Wed Jul 14, 2021 8:50 am
by toby173
Nice mods. We're currently in the process of sorting a few out at the local shop for our Ranger.

Curious as to why you went 3 inch lift in the front and 2 in the rear? Does the 3 inch at the front stretch the brake lines to it's limits? Or has the extension (droop) been limited?

At the moment i've just got quotes on a 2inch lift for OME and Dobinsons.

Re: Fx4 work in progress

Posted: Wed Jul 14, 2021 1:21 pm
by lincolnland
Levels the car with 3 inch in the front. Brake lines will be stretched when articulating. Requires bendix extended braided brake line kit.

Re: Fx4 work in progress

Posted: Wed Jul 14, 2021 2:35 pm
by Seanfx4
Like lincolnland said, it levels the car out and I think looks better but when off road you are getting to the end of the standard brake lines.
I'll be doing a Dobinson MRR upgrade soon so will put up more pics with extended brake lines / swaw bar links ets.

Sent from my SM-G996B using Tapatalk


Re: Fx4 work in progress

Posted: Wed Jul 14, 2021 4:47 pm
by GerryP
I thought a 3" lift ideally needs a diff drop?

Re: Fx4 work in progress

Posted: Sat Jul 24, 2021 10:01 pm
by NUTSACK
What model Audison splits are they? How do they sound? I’ve used Audison amp and processors before but never really considered there speakers, I usually go with Focal speakers..
What sub did you use, how many litres or cu ft is that box? I was thinking of dual 10’s behind the seat in my new one..

Re: Fx4 work in progress

Posted: Tue Jul 27, 2021 2:48 pm
by Seanfx4
The Splits are the apk165 and sub is aps10d. I've used a bit of focal and hertz in the past and fairly comparable in sound. I'd say the higher end hertz and focal have a bit more mid bass but pretty impressed with the sound. Box is 13lt but will be coming out soon. Going for dual 10" in custom box instead.

Sent from my SM-G996B using Tapatalk


Re: Fx4 work in progress

Posted: Tue Jul 27, 2021 2:51 pm
by Seanfx4
Yeah GerryP ideally to keep cv angle to a minimum 3" should have diff drop I just haven't had the car under that much load off road where I'm concerned with them.
But they are definitely getting installed with the new front set-up comming.

Sent from my SM-G996B using Tapatalk


Re: Fx4 work in progress

Posted: Wed Jul 28, 2021 9:20 pm
by NUTSACK
Seanfx4 wrote: Tue Jul 27, 2021 2:48 pm The Splits are the apk165 and sub is aps10d. I've used a bit of focal and hertz in the past and fairly comparable in sound. I'd say the higher end hertz and focal have a bit more mid bass but pretty impressed with the sound. Box is 13lt but will be coming out soon. Going for dual 10" in custom box instead.

Sent from my SM-G996B using Tapatalk
Ye from what I’ve heard people say they are a neutral sounding speaker, I prefer a lively sound..

Are you going dual 10’s behind rear seat? What subs are you thinking? I’ve looked at a few slimline models and I’m considering JL Audio 10TW3, Focal P25 FSE, Rockford Fosgate T1S2-10

Re: Fx4 work in progress

Posted: Thu Jul 29, 2021 12:20 pm
by Fondles
For dual 10's in a double cab, these boxes they make here are pretty nifty.

Image

Re: Fx4 work in progress

Posted: Thu Jul 29, 2021 1:09 pm
by lincolnland
Now that right there is cool af

Re: Fx4 work in progress

Posted: Thu Jul 29, 2021 7:39 pm
by NUTSACK
Hmm, I’m not sure about that setup..looks like they are pushing into the seat pretty hard and are they infinite baffle subs?

Re: Fx4 work in progress

Posted: Sat Sep 18, 2021 11:37 am
by Seanfx4
New suspension installed

Dobinsons mrr 3" Front fully adjustable
Dobinsons mrr 2" Rear

And straight to the tracks and campingImage

Diff drop and brake lines on backorderImageImageImageImageImageImage

Sent from my SM-G996B using Tapatalk


Re: Fx4 work in progress

Posted: Sat Sep 18, 2021 3:30 pm
by Fondles
Nice suspension kit, congrats.