PX1 to Raptor Conversion

[JyeEdwards]

Hi all,

I've had my 2012 px1 ranger for about 6 months now and have added a few mods in the time I've owned it, however I've decided I not only wanted to update my front end to a px2 with mustang style headlights but also a raptor body kit as well. As soon as I find out I need something to make this project happen there's another 2 things that pop that not many people I've found have addressed on google or forums...

Adding the mustang style headlights aren't generally an issue because everyone that is adding them already has a px2 that has the correct wiring looms for their headlights, whereas the px1 has a different set of plugs on the loom. I'm struggling to find info on these wiring looms, google isn't doing much and there's next to no videos regarding this issue. Does anyone know where I can buy the 3 pin px2 wiring looms for the headlights?

A pic of my car for attention:

[JyeEdwards]

I saw this other one pop up on marketplace a couple of months ago that had given me the inspiration to do something similar, and the numpty I am forgot to ask the fella advertising the car some questions before it was sold.
Little did I know how much work is required to achieve this result. Another thing, I'm not entirely sure what offset wheels I should be looking at getting to fit the raptor kit either. My wheels currently poke out 20mm and are 275-70-17 tyres but the raptor kit protrudes a further 100mm on either side from the standard guards. My math might be completely off but wouldn't that mean I roughly need a negative -30 offset to accommodate this? Cheers